Döner Kafalı Cross-Cut

CROSS CUT ADHESION TEST CC1000

The TQC Cross Cut Adhesion Test KIT CC1000 is used to test the adhesion
of dry coats of paint on their substrate by means of a series of cuts through
the coating. Two series of parallel cuts cross angled to each other to obtain
a pattern of 25 or 100 similar squares. The ruled area is evaluated by using
a table chart after a short treatment with a stiff brush, or adhesive tape for
hard substrates. 

The round cutting knife of the TQC Cross Cut Adhesion Test KIT CC1000
has eight cutting edges that can be changed easily by rotating the knife.
The self positioning knife bracket of the TQC Cross Cut Adhesion Test
KIT CC1000) ensures equal pressure on the cutting knife.

Each TQC Cross Cut Adhesion Test KIT CC1000 contains a grip with cutter,
a brush, an illuminated loupe and a roll of adhesive tape acc. EN ISO 2409.

VF1839
TQC Cross Cut Adhesion Test CC1000, 6 blades, cutting distance
1 mm, acc. to EN ISO
For use on coatings up to 60 µm on hard substrates. 

VF1842
TQC Cross Cut Adhesion Test CC1000, 6 blades, cutting distance 2 mm, acc. to EN ISO
For use on coatings up to 60 µm on soft substrates and coatings from 61 to 120 µm on both hard and soft substrates.

VF1844
TQC Cross Cut Adhesion Test CC1000, 6 blades, cutting distance 3 mm, acc. to EN ISO
For use on coatings from 121 µm to 250 µm on both hard and soft substrates.

VF1846
TQC Cross Cut Adhesion Test CC1000, 11 blades, cutting distance 1 mm, acc. to ASTM
For use on coatings up to 50 µm.

VF1847
TQC Cross Cut Adhesion Test CC1000, 11 blades, cutting distance 1.5 mm, acc. to ASTM
For use on coatings from 50 to 125 µm.
 

      Yazıcı Dostu Sayfa
Ayrıntılı Bilgi Formu
Hizmetlerimiz ve diğer konular hakkında bilgi almak için bizimle irtibata geçebilirsiniz.


Ad Soyad
:  
Firma Adı
:  
E-Mail :  
Telefon
:  
Şehir
:  
Mesaj
:  
        
Bu Sayfayı Arkadaşına Gönder
Sayfayı arkadaşınıza göndermek için lütfen aşağıdaki bilgileri doldurunuz.


Ad Soyad
:  
Ark. Adı
:  
Ark. E-Mail
:  
Mesaj
: